In line with its ongoing US manufacturing expansion efforts, Siemens Energy celebrated the official opening of its new wind turbine nacelle assembly facility in Hutchinson, Kansas, today. This is an important milestone in Siemens’ growth strategy in the US, further demonstrating the company’s stated commitment to US investment and its confidence in the long-term future of the US renewable energy market. See video from Siemens at: inr.synapticdigital.com “We’re investing in wind in America because we believe that wind power is here to stay. The US is one of the most important wind power markets in the world and by opening our first nacelle assembly facility in the US, we are closer to our customers, allowing us to better meet the strong demand for clean energy right where it’s used,” stated Eric Spiegel, CEO of Siemens Corporation. “We are optimistic that there will continue to be a long-term support system for wind power in the US, which will serve to solidify our country’s growing energy independence using this clean and abundant natural resource to fulfill a sustainable electricity demand.” With a five-year average growth rate of 39 percent and nearly 37 GW of installed wind power capacity, the US is currently ranked number one globally in terms of installed capacity. Senator Sam Brownback said, “The grand opening of the Siemens wind nacelle manufacturing plant is great news for the Hutchinson community and the state of Kansas. The expansion of renewable energy …
The Champion of Video Competition of AIESEC Surabaya-Nokia Siemens Network Project Based on Exchange HIV/AIDS and Narcotics Submitted by: SMA St. Louis I Surabaya Video Rating: 0 / 5
It’s safe, sustainable, superfast and coming soon to the United States. Florida is about to make transportation history as the first state to build a high-speed rail corridor, with trains connecting Tampa to Orlando and then to Miami in a second phase. Get the full story at TheAutoChannel.com. Video Rating: 4 / 5
Visit bit.ly for more wind energy solutions. See how a leader in wind power uses NI LabVIEW graphical software and user-defined hardware to develop highly reliable, state-of-the art wind turbines.
This is part 1/3 of the “how to use part families inside Siemens NX 7.5″ tutorial. A shackle family has been designed based on the suppliers table dimensions. Version used: Siemens NX 7.5.2 on Windows 7 64bit. Video Rating: 5 / 5
As an innovation leader in dose reduction, Siemens has always been committed to the ALARA principle (As Low as Reasonably Achievable). Built on this principle, Siemens has long applied a comprehensive approach to all areas of diagnostic and interventional imaging: CARE – Combined Applications to Reduce Exposure. Video Rating: 0 / 5
Find out how Mercury Marine reduced change cycle time from 56 to 22 days Mercury Marine has one integrated enterprise-wide system, Siemens PLM teamcenter, to manage data, streamline product development, and lower the cost of engineering change. For more information on the Siemens PLM product suite , please visit www.camlogic.com Video Rating: 5 / 5
During the football World Cup in June 2010, Nokia Siemens Networks and Zain, Bahrain jointly launched an interactive marketing promotion, Zain Wonders Cup Mania. Over 200 virtual videos starrng Zain’s young customers were shot and shared on social media via Nokia Siemens Networks-built 3G network. Video Rating: 5 / 5
Some Information!… All this has been programmed using JavaScript, AJAX and PHP software, so it’s all browser based. The sequence can be programmed using blocks (actually html divisions) to specify the on/off points on a time scale for each individual track. This is then saved to a MySQL database and referenced to PLC output bits. The sequence can then be exported in statement list and pasted into the Step 7 networks. The program is based on a single counter and numerous comparators to remain in time with the music. Each minute of the tune is split into different program function blocks to increase the cycle time. The MP3 player is given an initial signal from one of the output bits at the start of the program and reset at the end. This is linked up to amplifiers and side speakers as shown! Enjoy! and leave your comments below!!
Siemens challenged Orange County Choppers (OCC) to build an all-electric chopper that showcases each industry that Siemens is involved with. The all-electric chopper features new and recycled materials, LED lighting by OSRAM SYLVANIA, and an on-board charger that can be plugged into any 110-volt outlet. The chopper has a range of 60 miles on a single charge, and a recharge time of 5 hours (1-2 with a charging station). It is the first all-electric bike built by OCC, and it promotes the message of sustainability and green technologies. The video takes a look at how OCC uses the AF-6080 Five-Axis Waterjet system and the Siemens SINUMERIK control to create some amazing 3D work for OCC choppers. People are still surprised that you can cut metal with water. For more information visit www.siemens.com.
